Module 1 ver 2 by Demonsk
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is set to 50% (50% is perfectly square, 100% is very short pulsewave) and is modulated by Mod Wheel, Mod Env.
Mod Wheel modulates Mod Env (amount: 127), that in turn modulates pulse width of square oscillator.
Mod Env mod-matrix 1 modulation amount for pulse width of square oscillator is 127.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 232.
Tone for oscillator 2 is manually set to 94.
Oscillators ranges timbre
Oscillators 1 range is 16'.
Oscillators 2 range is 16'.
Noise timbre
Noise level is set to 128 and is modulated by Mod Wheel.
Mod Wheel mod-matrix 7 modulation amount for Noise level is 127.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 50.24Hz (51).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 858.37Hz (121) and is modulated by Mod Wheel, Note Vel, LFO 2, VCF Env, Mod Env.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 192.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 162.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 148.
Filter resonance is statically set to 48% (122).
Oscillator drift & unison detuning timbre
Unison detune level is set to ±26 cents (135) and is modulated by Mod Wheel.
Mod Wheel mod-matrix 2 modulation amount for unison detune level is -23.
Oscillators drift level is manually set to 29. Drift rate is 33
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
Arpeggiator pitch
Arpeggiator rate is 127 bpm with a clock divider of 1/16 and is set to key synchronisation mode.
Arpeggiator gate is manually set to 255.
Arpeggiator mode is Up&Down Inv (5) over 3 octaves.
Arpeggiator swing rate is set to 55%
Tuning pitch
Patch Module 1 ver 2 is transposed by -12 semitones.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 121. Effect 2 level is manually set to 139. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.
Flanger fx
not yet complete
Stereo Imaging fx
not yet complete
Enhancer fx
not yet complete
Phase fx
not yet complete
Mod Wheel modulator
Controls Unison Detune, Noise Level, All Envelope Rates, VCA Gain for All Voices, VCF Cut-off Frequency, OSC 1 Pulse Width Modulation Depth, All Sustain Levels.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | Unison Detune | -23 |
| timbre | matrix | Noise Level | 127 |
| timbre,volume,pitch | matrix | All Envelope Rates | 28 |
| volume | menu-indirect | VCA Gain for All Voices | 255 |
| timbre | fader-indirect | VCF Cut-off Frequency | 162 |
| timbre | indirect | OSC 1 Pulse Width Modulation Depth | 127 |
| timbre,volume,pitch | indirect | All Sustain Levels | -22 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 148 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 162 |
| menu | VCF Envelope Velocity Sensitivity | 128 | |
| menu | VCA Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 1 Pitch Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| pitch | matrix | OSC 1 Pitch Modulation Depth | -100 |
| name | value |
|---|---|
| LFO 1 Rate | 0.57Hz (91) |
| LFO 1 Delay / Fade | 2.09s (81) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls VCF Cut-off Frequency, OSC 1 Pitch Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 192 |
| pitch | matrix | OSC 1 Pitch Modulation Depth | -51 |
| name | value |
|---|---|
| LFO 2 Rate | 0.14Hz (42) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Sine |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 0.3s (51) |
| VCA Envelope Sustain Level | 45% (114) |
| VCA Envelope Release Time | 0.63s (94) |
| VCA Envelope Trigger Mode | Control Sequencer Step (4) |
| VCA Envelope Attack Curve | 0 |
| VCA Envelope Decay Curve | 10 |
| VCA Envelope Sustain Curve | 0 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 162 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.17s (29) |
| VCF Envelope Sustain Level | 35% (89) |
| VCF Envelope Release Time | 1.09s (125) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 81 |
| VCF Envelope Decay Curve | 69 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |
Mod Env modulator
Controls OSC 1 Pulse Width Modulation Depth, All Sustain Levels, VCA Gain for All Voices, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | OSC 1 Pulse Width Modulation Depth | 127 |
| timbre,volume,pitch | matrix | All Sustain Levels | -22 |
| volume | menu-indirect | VCA Gain for All Voices | 255 |
| timbre | fader-indirect | VCF Cut-off Frequency | 162 |
| name | value |
|---|---|
| Mod Envelope Attack Time | 0.62s (93) |
| Mod Envelope Decay Time | 0s (0) |
| Mod Envelope Sustain Level | 23% (60) |
| Mod Envelope Release Time | 0.46s (78) |
| Mod Envelope Trigger Mode | Key (0) |
| Mod Envelope Attack Curve | 128 |
| Mod Envelope Decay Curve | 0 |
| Mod Envelope Sustain Curve | 128 |
| Mod Envelope Attack Curve | 0 |
Ctrl Seq modulator
Controls VCA Envelope Trigger Mode, OSC 1 + 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| volume | env-trigger | VCA Envelope Trigger Mode | |
| pitch | matrix | OSC 1 + 2 Pitch | 127 |
| name | value |
|---|---|
| Ctrl Sequencer Enable | on |
| Ctrl Sequencer Clock Divider | 12 |
| Sequence Length | 6 |
| Sequencer Swing Timing | 5 |
| Key Sync & Loop | 0 |
| Slew Rate | 0 |
| Seq Step Value 1 | 126 |
| Seq Step Value 2 | 147 |
| Seq Step Value 3 | 150 |
| Seq Step Value 4 | 140 |
| Seq Step Value 5 | 143 |
| Seq Step Value 6 | 149 |